EM Products
Filter By
Showing 1996–2010 of 2920 results
-
RC-010 software for remote control of CCU-010
Windows-based RC-010 remote control software allows Safematic CCU-010 coaters to be run remotely for the control, monitoring and analysis of coating processes, for example in a glove box. The RC-010 comes ready with pre-defined recipes with optimal settings for the most common metal sputtering targets as well as for carbon. Requires connection from a laptop or computer (not supplied) to the CCU-010 coating system via a USB cable.
Price On Request £0.00 Add to basket -
Regular quartz front cap (door)
Regular quartz front cap for easy loading and unloading of regular SEM samples or TEM grids into the sample chamber.
Price On Request Read more -
Replacement brass float bar for Hitachi SEM stage adaptor
Replacement brass float bar for Hitachi HV40 T-base SEM stage adaptor – brass (each)
£30.28 Add to basket -
Replacement conductive O-rings for the EM-Tec C-Square multi-pin stub holders
Replacement conductive and vacuum compatible gripping O-rings for the EM-Tec C-Square multi-pin stub holders (set/20)
£20.06 Add to basket -
Replacement hardened glass lid for EM-Storr 110 EL
Replacement hardened glass lid for EM-Storr 110 EL large chamber vacuum sample container – diameter 130 x 15mm (each)
£126.85 Add to basket -
Replacement lid for EM-Storr series 80 vacuum container
Replacement hardened glass lid for EM-Storr series 80 vacuum sample container – Ø100 x 10mm (each)
£68.57 Add to basket -
Replacement lid for EM-Storr vacuum container – Ø130 x 10.2mm
Replacement hardened glass lid for EM-Storr vacuum sample container- Ø130 x 10.2mm (each)
£126.96 Add to basket -
Replacement NBR gripping O-ring for EM-Storr 81P vacuum sample container – Ø3mm ID x 1.5mm CS
Replacement NBR gripping O-ring for EM-Storr 81P vacuum sample container – Ø3mm ID x 1.5mm CS (set/20)
£20.06 Add to basket -
Reusable desiccant box with orange indicating silica gel
Micro-Tec DB5 reusable desiccant box with orange indicating silica gel- 55x55x27mm (each)
£6.36 Add to basket -
RoStub
RoStub. A rotational axis that provides an additional degree of freedom for all substages and for the liftout shuttle. It allows 360° unlimited rotation of a specimen stub. *Note: the system requires the fourth channel on an existing NanoControl unit or dedicated control electronics and vacuum feedthrough (e.g. when used in conjunction with MGS2-EM).
Price On Request £0.00 Add to basket -
Rotary support for PS-006
Rotary support for use with the PS-006 planetary gear stage. Includes slip-on specimen holder which converts the planetary gear stage into a rotary stage. Twelve M2 threads for mounting specimens or for the using S-clips. Six mounting clips M2 included.
Price On Request £0.00 Add to basket -
Rotation motor with encoder at pre-tilt for Phenom
Rotation motor with encoder at pre-tilt for Phenom desktop microscopes. Rotational positioner with positional encoder offering 0.2° absolute resolution.
Price On Request £0.00 Add to basket -
Rotational tip
A plug-in tool for the MM3A-EM to allow 360° unlimited axial rotation of the tip holder or a TEM grid holder. The tip comes with a control module, a TEM grid holder and an operator’s handbook.
Price On Request £0.00 Add to basket -
Rotational tips (pack of four)
Four Rotational Tips – A plug-in tool for the MM3A-EM to allow 360° unlimited axial rotation of the tip holder or a TEM grid holder. The tip comes with a control module- and an operator’s handbook.
Price On Request £0.00 Add to basket -
Rotational tips (pack of three)
Three Rotational Tips – A plug-in tool for the MM3A-EM to allow 360° unlimited axial rotation of the tip holder or a TEM grid holder. The tip comes with a control module- and an operator’s handbook.
Price On Request £0.00 Add to basket